BZBWM - B31W401 PROMAR 400 INTERIOR LATEX SEMI-GLOSS ENAMEL

Product Identification

Product ID:B31W401 PROMAR 400 INTERIOR LATEX SEMI-GLOSS ENAMEL
MSDS Date:04/02/1996
FSC:8010
NIIN:00F006425
MSDS Number: BZBWM

Responsible Party
SHERWIN-WILLIAMS CO/MARTIN SENOUR CO
101 PROSPECT AVE N W
CLEVELAND, OH 44115-1042
US

Emergency Phone: 216-566-2917/216-566-2902

Info Phone: 216-566-2902/216-566-2917

Cage: 54636

Contractor
SHERWIN-WILLIAMS CO THE
CLEVELAND, OH 44115-1042 US

Telephone: 800-251-2486/216-566-2242

Cage: 54636

Ingredients

2-(2-BUTOXYETHYOXY)-ETHANOL, DIETHYLENE GLYCOL MONOBUTYL

CAS: 112-34-5

RTECS: KJ9100000

Fraction By Weight: 2%


ETHYLENE GLYCOL, GLYCOL *96-2*

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1%

OSHA PEL 50 PPM

ACGIH TLV: C 127 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


TITANIUM DIOXIDE, TITANIUM OXIDE (SUSPECTED ANIMAL

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 17%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF EYES, SKIN & UPPER
RESPIRATORY SYSTEM. PROLONGED OVEREXPOSURE TO SOLVENT MAY CAUSE
ADVERSE EFFECTS TO THE LIVER & URINARY SYSTEMS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, NAUSEA, DIZZINESS,
REDNESS, ITCHING, BURNING SENSATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. KEEP WARM
& QUIET. SKIN: WASH AREA THOROUGHLY W/SOAP & WATER. EYES: FLUSH
W/LARGE AMOUNTS OF WATER FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN
ALL CASE S.

Fire Fighting

Extinguishing Media:CO2, DRY CHEMICAL, ALCOHOL FOAM
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT & SCBA. WATER
SPRAY MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE
PREFERABLE. USE WATER TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO
BUILD-UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION. VENTILATE & REMOVE
W/INERT ABSORBENT.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
TRANSFER ONLY TO APPROVED CONTAINERS W/COMPLETE & APPROPRIATE
LABELING. USE ONLY W/ADEQUATE VENTILATION.
Other Precautions:DON'T TAKE INTERNALLY. KEEP OUT OF THE REACH OF
CHILDREN. AVOID BREATHING VAPOR & SPRAY MIST. AVOID CONTACT W/SKIN
& EYES.

Exposure Controls

Respiratory Protection:IF PERSONAL EXPOSURE CAN'T BE CONTROLLED BELOW
APPLICABLE LIMITS, WEAR A PROPERLY FITTED ORGANIC VAPOR/PARTICULATE
RESPIRATOR APPROVED BY NIOSH/MSHA. WHEN SANDING/ABRADING, WEAR A
DUST/MIST RESPIRATOR APPROVED BY NIOSH/MSHA.
Ventilation:LOCAL EXHAUST PREFERABLE. GENERAL EXHAUST ACCEPTABLE TO
MAINTAIN BELOW APPLICABLE EXPOSURE LIMITS.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:212-448F
Vapor Density:>1
Spec Gravity:1.18
pH:9.5
VOC Grams/Liter:.83
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:67

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:BY FIRE: CO2, CO

Disposal

Waste Disposal Methods:INCINERATE/DISPOSE OF IN AN APPROVED FACILITY
IAW/FEDERAL, STATE & LOCAL REGULATIONS. DON'T INCINERATE CLOSED
CONTAINERS.

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.